Product Description
External Halyard Flagpoles consist of the rigging system being located on the outside of the flagpole. A rope runs up the shaft of the flagpole to a truck assembly located at the top, where it passes through a pulley. The rope then returns back down the shaft to be tied off to an external cleat typically located 4 ½’ above grade. External stationary truck standard.
Standard Equipment
- Gold Anodized Aluminum Ball
- External Stationary Truck
- Solid Braid Nylon Halyard (5/16")
- (2) 3-1/2" Bronze Swivel Snaphooks
- 9" Cast Aluminum Cleat w/ Stainless Steel Screws
- PVC Ground Sleeve
Wind Speed Chart
Specification Sheets
(EHS - Ground Set) Specification Sheet (EHS) Installation Sheet
(Open Market)
Request Service or Installation Here
|
Satin Brush – (SAT) A textured mechanical finish produced by abrasive polishing yielding a smooth and uniform appearance. This finish is used on aluminum, stainless steel, and bronze.
|
Clear Anodized Finish – (CLR) Anodizing is a process of electrolysis used on aluminum alloys to increase corrosion resistance and to allow coloring. The common colors are clear, bronze, and black. These finishes are highly recommended in coastal areas and are perfect matches for many building skins. Light bronze, medium bronze and other common colors are also available. (Limited to aluminum)
|
Light Bronze Anodized Finish – (LBA) Anodizing is a process of electrolysis used on aluminum alloys to increase corrosion resistance and to allow coloring. The common colors are clear, bronze, and black. These finishes are highly recommended in coastal areas and are perfect matches for many building skins. Light bronze, medium bronze and other common colors are also available. (Limited to aluminum)
|
|
Medium Bronze Anodized Finish – (MBA) Anodizing is a process of electrolysis used on aluminum alloys to increase corrosion resistance and to allow coloring. The common colors are clear, bronze, and black. These finishes are highly recommended in coastal areas and are perfect matches for many building skins. Light bronze, medium bronze and other common colors are also available. (Limited to aluminum) |
Dark Bronze Anodized Finish – (DBA) Anodizing is a process of electrolysis used on aluminum alloys to increase corrosion resistance and to allow coloring. The common colors are clear, bronze, and black. These finishes are highly recommended in coastal areas and are perfect matches for many building skins. Light bronze, medium bronze and other common colors are also available. (Limited to aluminum)
|
Black Anodized Finish – (BLA) Anodizing is a process of electrolysis used on aluminum alloys to increase corrosion resistance and to allow coloring. The common colors are clear, bronze, and black. These finishes are highly recommended in coastal areas and are perfect matches for many building skins. Light bronze, medium bronze and other common colors are also available. (Limited to aluminum)  |
