For Rope Based Flagpole

Compression Door Lock with Key - 5"-7" Butt Diameters

Concord - Compression Door Lock with Key - 5"-7" Butt Diameters

Flagpole Counterweights for Internal Halyard Systems (Open Market)

Counterweights are required in Internal Halyard Systems to assist in the lowering of flags. They also ensure the flag hangs and flies properly in winds by keeping the flag taught. Three sizes allow the proper choice of counterweight based on wind zone...

5” Sentry Door with Lock & Keys (Fits Sentry 8 bolt Frames)

Type a description for this product here...

Internal Halyard Cap Style Stationary Trucks (Open Market)

Internal Halyard Revolving Rope-Based Trucks (Open Market)

Replacement Keys for Independence, Sentry II, and Extreme XIRW Flagpoles

Type a description for this product here...

CLEARANCE Pre-Cut, Pre-Bagged Flagpole Halyard Remnants (1/4", 5/16", & 3/8") (Standard Nylon & Wire Core)

Pre-Cut, Pre-Bagged Flagpole Halyard Remnants (1/4", 5/16", & 3/8")(Standard Nylon & Wire Core)

Replacement Door for Concord Sentry Flagpole with 20-Bolt pattern, DOR0003

For Concord's Sentry Line of Internal Rope-Based Halyard flagpoles. There are two different types of sentry flagpole doors. One has a 8 Hole Bolt pattern and the other has a 20 hole bolt pattern. This is for the 20 hole bolt pattern. Includes the...

Replacement Keys for Sentry Flagpoles

Type a description for this product here...

Cam Cleat for Internal Halyard, Rope-Based Flagpoles, CLA-0600

Cam Cleats are used in Internal Rope Halyard Systems, securely holding the halyard behind a heavy-duty cam action cleat. Maximum Rope diameter is 5/16".

Rope Assembly, Wire Core, 3/16in, 40ft Flag Pole, White, 360340

Nylon rope assembly with wire core, suitable for a 40 foot flag pole. Assembly consists of 90 feet of 3/16" white nylon rope with wire core. Typically used where a cam cleat has been installed. Assembly comes complete with a zinc plated carbon steel rope...

Rope Assembly, Wire Core, 3/16in, 40ft Flag Pole, Bronze, 360342

Bronze nylon rope assembly with wire core, suitable for a 40 foot flag pole. Assembly consists of 90 feet of 3/16" nylon rope with wire core. Typically used where a cam cleat has been installed. Assembly comes complete with a zinc plated carbon steel...